Electric Heating Furnace Frequency Conversion Floor Type
Semiconductor Heating Heating Hot Water Boiler
Electric heating furnace product description:
Electric heating furnace is a fully automatic environment-friendly
boiler designed with the latest electric heating technology and
control system to supply hot water for heating, living and bathing.
The boiler is equipped with a special computer controller, which
adopts modern computer control technology to realize the
intellectualization, automation and humanization of the boiler
performance. It has the advantages of high stability, rich
functions, simple operation, convenient use and flexible control.
Electric Heater Boiler Technical Parameter:
| Serial number | Product model | Company | LC-L-40kw | LC-L-50kw |
| 1 | Rated power | KW | 40 | 50 |
| 2 | Rated current | A | 36.67A | 45.5 |
| 3 | Heating area | ㎡ | 200-300 | 300-400 |
| 4 | input voltage | 50HZ | 380V | 380V |
| 5 | Minimum flow of water pump configuration | L/min | 32 | 36 |
| 6 | Hot water yield 50 ℃ | L/min | 5.62 | 13.8 |
| 7 | Design thermal efficiency | ℃ | 98% | 98% |
| 8 | Maximum water temperature | ℃ | 85 | 85 |
| 9 | Low temperature protection temperature | ℃ | 5 | 5 |
| 10 | Overall dimension (length * width * height) | mm | 495*495*900mm | 490*490*900 |
| 11 | Water inlet and outlet interface | DN | 32 | 40 |
Characteristics of electric heating furnace:
1. Fully automatic intelligent control technology, no need for
special personnel to watch. The working mode is flexible and can be
set to manual or automatic mode.
2. The automatic operation time period of the boiler can be set as
required. A number of different working hours can be set in a day
to enable the boiler to automatically start each heating group in
time, and the heating group can be switched on and off in a cycle,
so that the service time and frequency of each contactor are the
same, and the service life of the equipment can be extended.
3. The controller can automatically control, calculate and track
the water temperature or pressure, automatically start and stop the
feed pump and electric heating pipe when the load changes, or
manually control.
4. It has a complete range of protection functions, including
leakage protection, water shortage protection, grounding
protection, steam overpressure protection, over-current protection,
power supply protection, etc., and the boiler is automatically
protected, so that it is safe to go home.
5. Small boiler body, electromechanical integration, easy to
install and match; Large boiler furnace body and electric control
are designed separately to eliminate the influence of high
temperature on the electric control part of the furnace body and
ensure the stable operation of electric control devices.
